Quantitative characterization of micro-topography

a bibliography of industrial surface metrology by Richard J. Pike

Publisher: U.S. Dept. of the Interior, U.S. Geological Survey in Menlo Park, CA

Written in English
Published: Pages: 145 Downloads: 666
Share This


  • Surfaces (Technology) -- Measurement -- Bibliography,
  • Geomorphology,
  • Earth -- Surface -- Measurement

Edition Notes

He is the author of more than publications and co-author of five book chapters, and holds multiple patents for device developments. Before joining UCSF in , Dr. Roy co-directed the BioMEMS Laboratory in the Department of Biomedical Engineering at Cleveland Clinic in Cleveland, Ohio, focusing on clinical applications of MEMS.   Abrasive rolling behavior (high load with low abrasive density) also effect on the groove formations [29]. Characterization The characterization of this study explained by following areas: a. Region of interest: All treatments had done on the rake face of the inserts; a worn edge of an insert as shown in fig and figure below. 2 Remote Sensing Technologies to Directly and Indirectly Measure Permafrost and Permafrost-Related Ecological Characteristics. Satellite, airborne, and surface-based sensors operating from the very-low-frequency (VLF) range to the optical region of the electromagnetic (EM) spectrum have been used for remote sensing of permafrost landscapes for several decades (Duguay et al., ; Hall, The bone-implant interface influences peri-implant bone healing and osseointegration. Among various nano-engineering techniques used for titanium surface modification, anodization is a simple, high-throughput and low-cost process, resulting in a nanoporous oxide coating which can promote osseointegration and impart antimicrobial and immunomodulatory properties. We anodized rounded Cited by: 3.

eclas book of abstracts. table of contents. a. timetable. 6. b. map of the school of arts, university college ghent & practicalities. On Significant Applications of Geophysical Methods: Proceedings of the 1st Springer Conference of the Arabian Journal of Geosciences (CAJG-1), Tunisia in Science, Technology & Innovation) - Kindle edition by Sundararajan, Narasimman, Eshagh, Mehdi, Saibi, Hakim, Meghraoui, Mustapha, Al-Garni, Mansour, Giroux, Bernard. Download it once and read it on your Kindle device, PC, phones or cturer: Springer. Journal Articles & Book Chapters Quantitative interpretation of molecular dynamics simulations for X-ray photoelectronspectroscopy of aqueous solutions Effects of Surface Micro-Topography on the Assembly of the Osteoclast Resorption Apparatus Dafna Geblinger, Christian Zink, Nicholas D. Spencer, Lia Addadi, Benjamin Geiger. Abstract: The recent advancements achieved in 3D analysis of surface micro-topography have raised a great interest of researchers and industrial users for the possibilities of the new techniques, in spite of their major complexity. In this paper the state-of-the-art in measurement methods, reference surfaces, visualization techniques.

  Today, its use is mostly grounded on quantitative evaluation of hydrating or anti-wrinkle creams (micro-topography). [16] In [25], authors use a mechanical profilometer to achieve accurate measure-ments of skin surface roughness, differentiating . Biocompatible Magnesium Alloys as Degradable Implant Materials - Machining Induced Surface and Subsurface Properties and Implant Performance. By Berend Denkena, Arne Lucas, Fritz Thorey, Hazibullah Waizy, Nina Angrisani and Andrea Meyer-Lindenberg. Submitted: November 22nd Reviewed: May 26th Published: September 12th DOI: 10 Cited by: As a rule, quantitative geomorphology involves specific morphometry and rarely addresses continuous topography, save in the context of regional landscape evolution. Terrain, or surface, modeling describes recent applications of digital-cartographic technology to topographic data (Petrie and Kennie, ; Weibel and Heller, ). Geomorphological mapping is one of the most important tools that helps to understand landscape character and evolution. In the digital era, cartographic products have become increasingly accessible to scientists and the wider society due to the development of GIS technology, increases in data and software availability (i.e. open source), and the expansion of user-friendly and easy-to-access.

Quantitative characterization of micro-topography by Richard J. Pike Download PDF EPUB FB2

Quantitative characterization of micro-topography a bibliography of industrial surface metrology: USGS Open-File Report [Pike, R. J., Thomas, T. R.] on *FREE* shipping on qualifying offers. Quantitative characterization of micro-topography a bibliography of industrial surface metrology: USGS Open-File Report Author: R.

Pike. Get this from a library. Quantitative characterization of micro-topography: a bibliography of industrial surface metrology. [Richard J Pike; Tom R Thomas; Geological Survey (U.S.)]. For the purpose of accurate inspecting IC chip by image, fuzzy gray theory is used for quantitative evaluating the IC micro-topography’s influence on its image characteristics.

Through extracting topography’s feature-points by precise coordinate measuring apparatus, its spatial surface model is structured and the topography characteristic parameters array is established, thus a Author: Zhong Wei Liang, Chun Liang Zhang, Si Kun You, Ai She Li.

QUANTITATIVE CHARACTERIZATION of MICRO-TOPOGRAPHY A BIBLIOGRAPHY of INDUSTRIAL SURFACE METROLOGY By RICHARD J. PIKE 1 andJOM R. THOMAS Provides literature citations on the quantification of micro- and nano-topographic surfaces and a brief introduction to the field of industrial surface metrology OPEN-FILE REPORT Other articles where Micro topography is discussed: biogenic landform: constitute what may be termed micro topography.

Some of these are produced by individual creatures or groups of such creatures. Examples include the cylindrical mud towers that stand 40–50 centimetres high atop crayfish burrows in the southern part of the United States; badger and bear den burrows; elephant waterholes.

biological processes (Larkin et al. Micro-topography can influence wetland hydrology, phy-sicochemistry, and habitat variability, and it is thus important in determining vegetation patterns and, ultimately, ecosystem function. Consequently, the manipulation of microtopography to promote plant community and ecosystem development has impli.

This paper is based on the experimental observation. The micro-topography characteristics of electrical discharge machining (EDM) surface were studied.

The results show that the EDM surface is made up of three-dimensional craters and hard protrusions overlapped alternately which distribute randomly and non-directionally. The pulse energy has significant effect on the forming of EDM surface Author: Hai Juan Ding, Xiao Xia Wang, Guang Lan Xia, Ping Feng, Xiao Hai Li.

This book deals with several aspects of topographic characterisation of nanometric engineering surfaces, based on the application of the fractal/multifractal theory, on setting up quantitative Author: Ştefan Ţălu. The Use of Power Spectrum Density for Surface Characterization of Thin Films would be exploited to develop novel micro-topography models.

quantitative comparison with the experimental. Amine Lakcher, Ahmed Zayed, Jennifer Shumway, Jan-Pieter van Delft, Gratiela Isai, Ruxandra Mustata, Arno van den Brink, Taeddy Kim, Jay Jung, Yong-Sik Shin, Soo-Kyung Lee, Paul Böcker, Mohamed El Kodadi, Geert Vinken, ChanHa Park.

Surface roughness is a terrain parameter that has been widely applied to the study of geomorphological processes. One of the main challenges in studying roughness is its highly scale-dependent nature.

Determining appropriate mapping scales in topographically heterogenous landscapes can be difficult. A method is presented for estimating multiscale surface roughness based on the standard Author: John B.

Lindsay, Daniel R. Newman, Anthony Francioni. Micro-structural characterization. Samples (10 mm × 10 mm) from each series were placed on double-sided tape. The tape was previously mounted on an object glass. The samples were then coated with a layer of gold for laser profilometry (LP) analysis (Lehmann, Lehman Mess-Systeme AG, Baden-Dättwil, Germany).Cited by: The STM and the AFM are quantitative measurement instruments, which are used together to measure the micro-topography of conducting and non-conducting materials.

With the advances in quantitative measurement instruments for 3-D surface topography, it is no longer difficult to obtain the topography of a practical surface over different scales. Search the leading research in optics and photonics applied research from SPIE journals, conference proceedings and presentations, and eBooks.

The formation of collagen fibers from staggered subfibrils still lacks a universally accepted model. Determining the mechanical properties of single collagen fibrils (diameter 50– nm) provides new insights into collagen structure.

In this work, the reduced modulus of collagen was measured by nanoindentation using atomic force by: Chinga-Carrasco, G. "Characterization of the fibrillation degree of various MFC materials and its implication on critical properties". Recent advances in cellulose nanotechnology research seminar.

NovemberTrondheim/Norway (). X-ray microtomography, like tomography and X-ray computed tomography, uses X-rays to create cross-sections of a physical object that can be used to recreate a virtual model without destroying the original prefix micro-(symbol: µ) is used to indicate that the pixel sizes of the cross-sections are in the micrometre range.

These pixel sizes have also resulted in the terms high. Three-dimensional micro-topography by Talbot-projected fringes (English) Quantitative photoacoustic spectroscopy for thermally thick samples (XXV CIO Anniversary Paper) [] characterization and experimental results [] Meneses-Fabian, C.

/ Rodriguez-Zurita. Qualitative and quantitative characterization of mangrove vegetation structure and dynamics in a peri-urban setting of Douala (Cameroon): an approach using air-borne imagery.

Pneumatophore height and density in relation to micro-topography in the grey mangrove Avicennia marina. Surface measurement – synonymous with surface metrology – determines surface topography, which is essential for confirming a surface's suitability for its function.

Surface measurement conceptually includes surface shape, surface finish, surface profile roughness (R a), or in surface area roughness (S a), surface texture, asperity and structural characterization.

He is the author of more than publications and co-author of five book chapters, and holds multiple patents for device developments. Before joining UCSF inDr.

Roy co-directed the BioMEMS Laboratory in the Department of Biomedical Engineering at Cleveland Clinic in Cleveland, Ohio, focusing on clinical applications of tion: Professor, Bioengineering.

Zhao. Three-dimensional Micro-Topography Enhances Directional Myogenic Differentiation of Skeletal Precursor Cells. In: Microelectromechanical Systems--Materials and Devices, Materials Research Society Symposium Proceedings (MRS). Boston, MA: DD and Before. Zhao and X. Zhang. The digital holographic microscope schematically sketched in Fig.

is used to capture the required two holograms with two different wavelengths. The setup contains a long-distance microscope objective (LDM) with a magnification of 10×, a numerical aperture (NA) of and a working distance (WD) of 51 mm.

Optical fibers are used to illuminate the test object and to provide the Author: Peter Maaß, Iwona Piotrowska-Kurczewski, Mostafa Agour, Axel von Freyberg, Benjamin Staar, Claas Fal. In the last 50 years, the development and the conception of biomaterials used for the construction of prostheses and medical devices has expanded very rapidly.

A wide variety of biomaterials are now commonly implanted in the human body for the treatment of various diseases such as heart failure, atherosclerotic diseases, aortic aneurysm, ear dysfunction and by: 7.

"Inferring the Origin Locations of Tweets with Quantitative Confidence" EARTH AND ENVIRONMENTAL SCIENCES DIVISION EES Earth System Observations Aiken, Allison 'Black Carbon from Biomass Burning' Chen, Min "Impact of Seasonality, Macro- and micro- Topography on Inundated Page 50 Poster 45 Page 21 Poster 81 Page 3 Poster 3 Page 22 Poster Preservation of Human Dental Surface Micro-Topography with Three-Dimensional Non-Destructive Digital Imaging () by Mary Striegel on In Archeology & Collections, Grants, Materials Conservation, Product Catalog, Reports: /02/   Preservation of Human Dental Surface Micro-Topography with Three-Dimensional Non-Destructive Digital Imaging () by Mary Striegel on In Archeology & Collections, Grants, Materials Conservation, Product Catalog, Reports: /02/ Shuvo Roy, PhD, is a bioengineer focusing on the development of medical devices to address unmet clinical needs through strong collaboration and a multidisciplinary approach.

He is the author of more than publications and co-author of three book chapters, and holds multiple patents for device developments. The synergistic effect of. Abhay Pandit is the Scientific Director of a Science Foundation Ireland funded Centre for Research in Medical Devices (CÚRAM) at the the National University of Ireland, Galway.

Prof Pandit’s postgraduate work focussed on the modification of a fibrin scaffold to deliver a therapeutic biomolecule and resulted in a clinical trial at the Burn. PUBLICATION O F T H E J O I N T C E N T E R FOR U R B A N STUDIES.

This book is one of a series published under the auspices of the Joint Center for Urban Studies, a. Characterization and Performance of PVA Brushes for Post-CMP Cleaning of Cu Low-k Films, Rakesh K. Singh, Christopher R. Wargo, David W. Stockbower, Entegris Inc. Semiconductor Industry Trends and What They Mean to CMP, Robert L.

Rhoades, Ph.D. – Entrepix, Inc. [3] watson, layne t., thomas j. laffey, and robert m. haralick. in a deflectometric measuring system, a series of illumination patterns is reflected at the specular surface and is observed by a camera. optical measurement of surface topography - youtube the benefits of optical measuring technology are its high point density and speed.

we use.In particular, and for nearly 20 years now, the combination of micro-topography, shallow geophysics and trenching in active faulting studies has led to the group producing numerous peer-reviewed publications and internationally recognized research papers (ca.

90 articles in ISI-JCR journals, citations).